VViViD+ Ultra Gloss Candy Charcoal Grey Vinyl Car Wrap Premium Paint Replacement Film Roll with Nano Air Release Technology, Stretchable Protective Cap Liner, Self Adhesive (1ft x 5ft)

A slight shade darker than my 2006 Ram in Mineral Grey Metallic, the metallic flake is identical and looks great. I wanted to make my own wheel inserts to match my factory paint and this vinyl is by far the best match I have seen and the easiest to work with, as seen in the before and after pictures. I only used 7" in length per wheel so you can easily do two sets of wheels (5' roll). I attached the vinyl using the dry method as it is easily repositionable and very easy to line up and reset if needed, just smooth down with your finger. I must also add that removing the air bubbles is the best I have ever used on any Vinyl, I can definitely see this as a great benefit to wrapping a full vehicle, bumper, etc... color match bumpers may be next.

The VViViD+ Ultra Gloss films are visually beautifully colored films. Installation was great and the film laid out well. The black film has the protective cap film, however the charcoal grey does not have one for some reason (3'x5' sheet). See picture of two 3'x5' rolls (black on left, grey on right). The black roll was on a firm cardboard core and rolled much larger in diameter. The grey roll had no core, and no protective cap film on the vinyl. It still was beautiful when complete, but why no protective cap? I had 2 rolls of the charcoal grey and neither roll had the protective cap, so it wasn't just a one roll occurrence.

First time wrapper. No indoor setup. Weather was 70° and sunny with a light wind.My spoiler is faded from a bad OEM paint job. It's pretty common on my model and I am pretty sure there was a class action lawsuit trying to get going at one point. Anyway. I don't have time for that.I took about an hour to wrap my spoiler. The paint underneath was pretty bad, but all I did was wash it really quick, dry, and then go over with it ISO.The vinyl was very forgiving. I have painted my own cars with rattle can and roll on paint (Rust-Oleum method). I will never paint my cars again. This stuff is life changing compared to paint and I can now see why wrapping has taken the auto industry by storm. Sure. I made some mistakes on my wrap, but I am very happy with the end result. For $20, I can not complain.I used knifeless tape, but couldn't get it really work so a lot of my trimming was done by hand. You will get a better result if you take the time to learn how to properly use knifeless tape. I also used a harbor freight height gun on the lowest setting and this really helped to remove the bubbles and fingers I was getting.Cons: I have fingers under the bottom edge of my spoiler. This is not a reflection of the product, but my skill level and time I wanted to devote to doing the wrap right. Careful with your razor blade!

90% color match to 1H1 Toyota. Close to 109 if paint was brand new. As a first timer to wrap...I found it challenging to pull,stretch and squeegee. Love how it had a protective clear film during installation to prevent some scratches but it does burr when heating up. Also with the candy do not over heat or work the material color seemed to change .Overall happy with it.*Note make sure u measure and order maybe extra half to a full foot pull stretch as a first timer.*Color and smoothness looked great immediately after install but after letting it sit outside for a bit...some of the lines folds and wrinkles show more.*Not sure if it was a roll defect or just how candy vinyl wraps work but some areas where I was stretching there is color differences in the wrap in spots. Far away not noticable but close up can see*

Color is great. But multiple issues with the roll not being tacky enough. Wrapping coming small won't be a big deal but trying to wrap a car with it isn't easy. I used 3m prior for another car with 0 issues

Works great covering all my dings of chipping paint on my car

It's alright. I'm a somewhat experienced wrapper and the reviews about it being not pliable and adhesion are correct. I'd hate to try and stretch this over a body line. It seemed to have trouble slipping over my trim piece and liked to peel and not stretch over on the curved edges (3M vinyl for example will mold to corners like silly putty)Required a lot of heat to get it to be more pliable. I wouldn't wrap my car with it but it's probably good for an interior flat piece or something. I had it on my roof area of my car for a little over a year and it started cracking and peeling up.

Excellent vinyl, it was easy to install and the quality was super good, I loved working with it