DaierTek 12V Relay Box 6 Way12 AWG Pre-Wired Waterproof Relay Box 6 Slot ATC/ATO Fuse Relay Block Universal Relay Panel for Automotive Car Marine Boat

Why did you pick this product vs others?:Works as intended. Grey wire goes to 12v+ not ground.Look:Looks OEMQuality:OEM QualitySize:Fits in my battery box on a Nordskog 535 Errand Master electric scooter.Wiring:Easy to understand if you pop the bottom cover off.

I needed a better way to wire the lighting on my Ford F150. This item was great! It has 6 connections. Very easy to wire. The relays work great just hit the switch and the lights jump on very bright! This fit right behind the battery and tie in was very easy. 1 ground wire and 1 battery line and your set. Just use your switches. I found that this was the best value by not having to buy each item separately. this comes in one easy package.

I am rewiring a 77 Vega hotrod and was planning on just paying someone to do it for me but this fuse box was so easy to wire up for a push start panel. It fot perfectly where the old heater blower was and is easy to check or replace fuses. It works great for my project!

My brother and I used two of these boxes to rewire a classic car. We liked the compact design and we bought an extra to fill one with relays and the other we filled all but two spots. We didn't need the fuses as we kept the OEM fuse block.We bought the bare assembly so we wired it ourselves. We have the proper tools to give great crimps on open terminals, we are very experienced in that task.The boxes are good and strong, plenty good enough to pass as OEM on a modern car IMO. What I don't like is that the relays are so tight together it is very difficult to get them out. We have to use a flat bladed screwdriver, often two at a time, to pry them out. The connection terminals provided have a high tension on the blades of the relays. It would be great to have some sort of tool to grip the relays from above so they can be pulled out more easily. Additionally the individual relay blocks that hold each relay snap in from the top of the box. As we've pulled out a relay the block sometimes comes loose, that's why we need to use two pry tools, one to hold the block down and one to pry on the relay.We placed the two boxes side by side, and the design for mounting to a panel accounts for this, the ears are staggered so they can be put side by side without having to change the height, a nice level installation. I would not say these are water proof, but they are quit tight. The bottom needs a tool to pry it off. Overall we are happy with these, just wish the connectors were not so tight.

Muy buenos.

The description claims that the covers make this a water proof box but the covers have no gaskets. It would be fine in an engine bay but I would not put this on a boat or anything that goes off road. The material quality seems good for the price but since it isn't suitable for my project I have not attempted to use it.

I ordered this and then looked closer at the reviews and almost cancelled my order and paid 4 times as much for a similar product from Painless Performance Wiring. Some of my concerns arose from other reviews relating to the housing being "cheap, flimsy, not weatherproof, arriving cracked" as well as the leads being "too short".First, if you're using this as intended, the leads are plenty long to crimp or solder to. The photo of the product accurately represents the length. You can pay $100+ to get a similar box from Summit or Jegs if you really struggle with adding length to route.Next, the box seems to be pretty typical of what you would expect in a modern car. This box should be within about 6" of your battery for the fuses to do what they are intended to do. I'm unsure how durable this is going to be in the long term but I think it will be just fine for my use case. If anything changes, I will update my review.I don't anticipate using these off-brand relays or fuses. I purchased as a nice little housing for my project.

Just what I needed